Energy & Environment
Reduce energy consumption
Within energy and environmental industries ATHCO-Engineering A/S offers a wide range of solution in order to reduce energy consumption and to reuse or reclaim the energy for different waster energy sources.
This could be a condensers within a waste to energy plant or as heat recovery for sewage water.
ATCHO-Engineering A/S have developed heat exchanger solutions for contaminated fluids and which allow for heat recovery for otherwise unused sources for heat recovery and energy optimization.
The product specifications, useful within energy and environment
Heat recovery is one of the primary focus for ATHCO-Engineering A/S, we have several years of experience handling the norms and regulations within Energy and Environment. ATHCO-Engineering A/S solution will reduce your CO2 foot print and decrease cost for production.
- Efficient designs
- Close temperature approach
- High design pressure
- Low pressure drop
- Small footprint
- Customized design
- CIP cleaning
Different heat exchangers
ATHCO-Engineering A/S have developed heat exchangers to handle the requirements for heat recovery and processes within energy and environment.
Flue Gas Condensation
Hot dust filled exhaust gasses
High fouling fluids
High fouling fluids is often an un-utilized source for heat recovery, due to fouling issues, ATHCO-Engineering A/S offers a solution with the Therm-x, which is a round heat exchanger with brushes. Even the most fouling fluids can be applied with the Therm-x.
High temperatures
Our Energy & Environment solutions
Top condensers – vacuum condensers
Condenser
- Save a high amount of energy.
- Built based on years of improvements and optimization.
In Biomass or dust loaded environment
Flue Gas Condensation
- Huge gains in heat recovery of up to 25%
- Low material consumption
Compact pressurized heat exchanger
TP-Hex
- Compact design saves and installation costs
- Up to 3 times smaller than a tube heat exchanger
Heat recovery from powder loaded air
Process Therm
- Low maintenance cost
- Heat recovery with constant condensation
Heat Recovery from waste water
Therm-x
- High efficiency
- Large operation range from 10 to 200 m3/h and from 100 kW to over 2MW
We improve the internal and external environment for the benefit of the individual and the nature
At ATHCO Engineering A/S we are very keen on making a difference for the environment. Not only are the majority of our products focused on the recovery of heat in the process industry, which means that our customers will experience a “greener” company profile, but we also comply with the strict rules and regulations of the Danish Labor Authorities, thereby holding our self responsible to the environment.
